Bad generic ESC from eBay

I have had a lot of luck purchasing parts on eBay. Sometimes they fail, but the sellers make up for it. Purchased this 30 amp generic ESC (unmarked, hope its a 30 amp), and it doesn't work. Bummer, was hoping to get her up with the extra power... Hope the seller replaces it. Will let you know.

Sopwith Motor Shafted

Yesterday I took the Hangar 9 Sopwith out to maiden, but was unable to fly due to a problem I thought I had solved. Now I have, definitively! The motor casing would pull forward under the thrust of the prop as the C-clamp holding the housing in place kept coming loose. I had pushed it back into its slot, or so I thought, but preflight inspection found the housing pulling again. I removed the motor this morning and reset the C-clamp, this time clearly in place. As a added safety I Dremeled a flat spot in the axle and put s 5mm wheel collar in place with a set screw. Note that this is actually the rear of the motor (it has a bolt on prop adapter forward and this shaft protrudes from the back. As the prop applies thrust it pulls the black can off the motor. The can is connected to the shaft. Just between the collar and the motor is the C-clamp).That sucker ain't goin' nowhere.

Art Tech Diamond 2500 Glider

Recently purchased this 2500mm EPO glider from Nitroplanes. This is one awesome aircraft! I maidened her today, and she flew sweetly for 20 minutes before my neck got tired and I landed. She took of from my hand, all I had to do was let go! I flew her first with a 3S 3300mAh 30C, but found she flew better and glided better with a 4S 3300 mAh 30C.

I had set her up with flaps (they say it comes with servos for the flaps, but it didn't. I set it up with TowerPro SG90MGs). I haven't figured out how to set up the spoilerons with the flaps for CROW landings, but I plan to call Horizon Hobby and have them walk me through it. I'm assuming I can do it with a DX8 and a 6 channel receiver. I did add 1/2 oz of weight to the tail and the CG still came out forward of the design 80-90mm. A lot of pilots have noted the CG comes out around 65-70mm. She is trimmed for gliding, and when under power I need to give her a bit of down elevator. She flies fine with the 3S, but she can get around really well with the 4S. Power on she can loop and roll easily, power off she has one heckuva glide ratio and sweet stall characteristics, but the balance between glide hover and stall is pretty thin. All in all, I am really pleased with her and she is quite a crowd pleaser! I can only fly her when I can steal my wife's SUV, she is so ginormous. I do transport her with the wings off, all 8 foot wingspan.

Cornell Cowl is FAB!

I described earlier how I lost control of the Cornell practicing spins, and crunched the front end. The motor/battery box turned into wood chips, literally, and the cowl was a shattered eggshell of its former self. today I completed the refurbishing of the cowl, installed it and now the Cornell is flight ready!

The eggshell...

CA and epoxied the unstable parts and breaks.

Bondo on...

Bondo off...

Sanded clean, ready for primer!

Primer gray.

First coat of dark blue, being warmed to fast dry in front of the fireplace.

Black top painted in, and a coat of clear acrylic enamel! I like shiny!

Installed, all done! She looks great again!

Field Cold Weather Gear

Just like there's "Field Monokote", one can come up with Field Weather Gear! A cold front moved through when we thought it was going to be hot and humid.Windy, cold and raining! We were freezing! Pulled out a ginormous plastic bag and voila! Cold Windy Weather Gear!

Kenny's Cowl cleaning up nicely!

Kenny put some red and yellow cote on the cowl I rebuilt for him, now it looks really great! He plans to put some more yellow underneath.

Steel Chin

The other day I lost control of my Eflite PT-19 Cornell in a spin and nosed it in hard. It turned the cowl into shattered egg shell, and the motor mount/battery box into wood chips. Today I began the process of rebuilding the nose. I decided to use a metal electric motor mount similar to this one, instead of rebuilding a wooden mount. Kenny Chandler had given me this mount several months ago for just this purpose. One problem now may be that instead of absorbing the impact by turning into chips, the energy may go back to the fuse and destroy it if it crashes again...

I removed what was left of the original motor box, and installed a header piece across the top.

I built a mount out of sandwiched popsicle stick wood. Trimmed it to fit.

You can see the top of the sandwich mount just over the battery. I installed the metal mount upside down to allow the back of the frame to let the battery pass through. This keeps the battery mobile for CG management.

Side view. I had to set the motor attachment part above the midline of the mount to keep the motor aligned with the cowl.

The ESC is installed below the motor mount. You can see the bolts into the frame I made (the sandwich frame above).

Lucky me, it lined up spot on! I really mean lucky... I guessed at where the mount should go on the front of the fuse!

This is the shattered cowl before repairs begin.

The top...

It was so badly shattered that I first had to CA and epoxy the breaks and cracks to stabilize it enough to sand it. I will let it cure overnight and tomorrow sand it down, Bondo it and if time permits, prime it and paint it over the next day or so. I think with what I learned working on Kenny's cowl this one can be resurrected too!

UPDATE (11/13/11): Checked CG today and I did have to pull the battery back all the way, and add 1 oz to the tail... Hate adding tail weight so I checked, rechecked and checked again. Put the weights as far back as I could.