ERazor 450: DOWN. I have all the parts, tomorrow will look at putting the main rotor back together and setting up the CCPM on it. May wait a day or so, kinda burnt out on CCPM setup after working on the EXI.
Frame is good, replaced some missing bolts and a frame support. The tail boom is new, and there were no issues when I rebuilt the tail assembly and re-greased the bearings.
The original rotor head was badly bent, feathering shaft, main shaft and flybar. The Grips were not salvageable as the main bearings could not be removed, but the thrust bearings are fine. Have the parts, will fix.
CopterX250: Down. Ditto the ERazor ... Have parts for the rebuild of the rotor head (feathering shaft), just need to do it. Can put that back together and re-setup the CCPM on that pretty quick.
CB180D: UP, no issues.
UFLYS: UP. In theory. Still very unstable. Might be fun to spend a day just sorting it out...
CB100#1: UP, no issues.
CB100#2: UP, no issues.
Posted on a gyro question on HeliFreak, not sure I understand some things about these "gyros" that I thought I understood pretty well... Interesting read: http://www.helifreak.com/showthread.php?t=273989
No comments :
Post a Comment