New Turnigy Scimitar Prop for MX-Bach

 A few weeks ago another crappy approach and landing lead to breaking the prop on the MX-Bach. I ordered a couple of Turnigy Scimitar blades from Hobby King, in most part for the price, but also because I like that shape.  For safety and looks I like to paint the tips, re-balance and then install.

Tips painted fluorescent green with white center stripe over white primer.

Props are very nice quality.

Installed. I went up from 19x8 to 20x8 as the smaller prop was the lower recommended prop for the RCGF-USA 35cc engine. See what diff, if any an inch makes (easy, killer...).

Exhausting... Trex 500 is back up!

I had given up trying to get the Align 500 4-Blade Head to work. Coulda, but didn't wanna... was just becoming a debacle. So I went back to 2 blade. This meant returning to the 2-Blade head and replacing its swash follower arms. I ordered the same one's I always had, these. They are the same ones I have ordered for this same head in the past. Look at the fine print. The screws that secure it to the head are M2.5. Bothe the 4-Blade and this Tarot 2-Blade head have always used M3. I tried installing them and the screws wouldn't bite... that's when I discovered a problem. I am confident the part did not change specs! I verified that the previous ones were M3, and they are. I had to pull them off the 4-Blade head and install them mismatched ones on the 2-Blade head. I could not get the 2.5mm ID bearings out of the new ones. Jeez... 

The free bearing is from installed swash arm. The one I am holding is the new 2.5mm ID bearing.

This is the existing non-damaged swash arm with the 3mm ID bearing. I pulled it off the 4-Blade head along with its mismatched opposite arm. The plan had to have two matching red arms.

The mismatched swash arms with the M3 bolts securing them in place. I cannot find swash arms for 500 sized helis with M3 bearings. I could and tried to change the M2.5 bearings but I can't get the bearings out of the new arms. This sucks... but it works.

I then found that there is a bad vibration that wanted to shake the aircraft apart. Turns out there is a subtle bend in the main shaft. I then replaced that. She is now balanced, tracking well, and ready to fly again, with her mismatched swash arms. If I bend these I am screwed. Literally.

I was in a bad mood when I started. Imagine how pissy I am now!

Flying the Hacker MX-2, MX-Bach RCGF-USA 35cc

Hot, Mississippi HOT!, But virtually windless. I wasn't entirely feeling it, but once I got everything in the car, I was pretty game! Took the Hacker MX-2, flying 3S. Its the first time on the iX12, had to program it at the field, made a few adjustments. Before leaving I decided to put slightly bigger wheels on the mains and tail, which helped, but she still would trip over the mains if ai wasn't careful. She has really super flexible mains, almost like paper... but I can land her super light, she's such a great flier, that its not much of a problem.

Fun flier!

First flight of the day with the MX--Bach. I was really distracted, not focusing well on the tasks at hand. I wasn't even there while flying my plane.  Unstable approach, unstable landing, tipped a little and prop strike...that was the end of the day. No other damage, so I'm not calling it a crash, though I guess technically it is... okay, fine, resetting the crash clock. I was flying a 19x8on this 35cc, the smallest recommended. I am 9ut of props for this one, so ordered two Turnigy 20 x 8 props, scimitar shaped. They'll be here in a week. Can't eat the price, $14 a piece.

Anthony was there with his 350, on the left, the 250 on the right benched for a split in the tail belt. He be humble, but the boy got skilz and it was fun to watch him enjoy himself. He prefers the smaller helis, something unique among pilots.

Well, the heat is something else, but that wasn't my excuse for anything. I wasn't feeling it today, though I flew the MX-2 well, but I was absent flying the MX-Bach. I just haven't felt much like flying lately, mostly because of the cost of the risk of a crash repair,and partly because I have been blue with all the crap going on. Today took  me away from all of that, and reminded me why I fly! Need to get the MXS-R and the Waco in the air, and get back to the 600's while I wait for parts for the 500.

It's all good.

MX-Bach RCGF-USA 35cc Update

Pre-flight checks after changing the prop. Sweet engine. 

Gotta love RCGF-USA for excellent pricing, quality engines and great personal service!

This is a good video of her sound, power and nice transitions. There are 3 idles, Flight, Approach and Landing, to prevent stalling out at lowest idle. I do this on my engines that run for about 30-60 secs and may quit at low idle. This guarantees a safe flight idle, and an effective approach and landing idle. Each are heard distinctly here. I also have a 2 sec up throttle speed, and a 1 second back throttle speed, both give a smooth transition over the throttle range when sudden changes are made with no noticeable effect.

Time to fly!

4 Blade 500 Not So Much

Since I had to change the swash control arms, and the Align 4-Blade Head already had them, I decided to try that head again. I bought heavy duty 600 sized control arms and cut them to fit, and made some mods.

I raised the butt a bit.

And put 600 size tail blades to help with the extra torque. 

Not sure they are needed, but why not. With the 500 tail fin the longer blades were not getting a safe clearance. 

These are wide chord, and clearly MUCH bigger at 93mm than the 500 size, about 78mm.

I put a 600 size tail fin, stiffened with the original 500 tail fin, giving good clearance.

Well, it was always one thing or another, and the blade holders were a tad loose no matter what. It just really wasn't worth it, other than being cool; it doesn't add anything so was becoming a pain in the ass. I know I could make it work, I just kept thinking how much easier it is to just be a two blade. So I ordered a new set of swash control arms today, be here in about a week, put the Tarot 2 blade head back on, and made the tail 500 size again. Waiting for the swash arms, just don't want to take them from the 4-Blade head.

Painted the tail blades white, putting a red strip on them, will balance them and reinstall. Kinda glad to have a flying machine rather than a flying experiment.

Tower Hobbies Uproar V2

I am looking for a nice flier to replace the Ugly Stik 40 that I loved, but killed. I was looking at the more expensive Hangar 9 Ultra Stik, which is sweet, but expensive and a bit overpriced. Instead, I found this smaller plane, 1200mm (48") that can handle a 10cc engine lijte the Evolution 10cc which would be a little big for this plane, which is perfect. This is the Tower Hobbies Uproar V2, for $100, fits the bill perfectly. A fun simple aerobat, its a nice fit for the subjectively weaker Evolution 10cc. I would put bigger, stouter gear on the front and back, probably with the oversized big wheels from the Stik, and use standard sized servos. I would need to beef up the hardpoints, but she can take the weight. This would be a nice plane to thrash around and practice with.

This is a bit exciting!

(Hmmmm...  can't help but think I am settling and just need to wait and get the Ultra Stick.)

RCGF-USA 10cc at the shop...

i

I pride myself on being able to work on pretty much every part of my aircraft, but no pride is lost sending the RCGF-USA 10cc to the shop where the company owner will personally take a look at it. I think this is only the second time in a decade I have had to send one in. It needs work I just don't have the tools to do. It needs a new cylinder head since the spark plug hole is stripped, which I can do and likely at least a front main bearing, which I could do, but I couldn't get the front base off to get to it. One of the things I love about these RCGF-USA engines is Joe Nelson's personal advice and care. I can call him, email him or send something in to him.

I am a bit worried he may tell me it just needs to be replaced, in which case I plan to put an RCGF-USA 15cc engine in, instead of the 10cc. I should know in a couple of weeks. Int the meantime, there the Spitty is, naked and cold... this one has at least 6 years on it, I think.