Twinstar 2 Begins

Always a sucker for a multiengine, when I powdered the Twinstar and was walking across the filed to gather her bones, I was already plotting the next one. The UPS man dropped off Number 2 the other day, and the replacement parts have come in. Late this afternoon I started the build.

The obligatory box pic.

New HITEC HS-82mg servos for the ailerons.

Both wings done and engine nacelles installed.

Tomorrow I will finish installing the motors, ESCS and completing the wings, may even get to the empennage.

I spent the morning fixing the aileron on the Eflite Ultimate and replaced the wheels, and since I am flying off a runway now, I put the wheel pants back on the little Great Planes red racer the name of which escapes me at the moment.  Hoping to get up in the air tomorrow!

Repaired SU-26 Horizontal Stab

The landing gear on these planes never comes off clean. When the get torn off, they roll, and in the case of wheel pants poke a hole in the underside of the wing as they go by. In the case of the pant-less Sukhoi, the gear itself crashed into the port horizontal stabilized and crushed the center. I didn't take a pic of the pretty bad damage, but this is a hollow stabilizer, no foam so it broke like an egg. I cut out the damaged section first...

I added the bar to the front of the stab, and the tabs to support the sheet balsa. You can see the clean wedge resection. This is the underside.

Not having a piece of wood that would create a clean single piece leading edge, and given the hollow design, I built up a leading edge over the bar I had installed, with scrap balsa straps cut to fit the gap and surround the bar. These would be sanded down and create a nice smooth leading edge. It is interesting how the original manufacturer curved the sheet balsa like a clams he'll to form the leading edge. Seems cumbersome.

I sheeted the stab with a custom cut piece of balsa that was a tad thicker than the stabs covering balsa, and let that dry overnight. I did this to both the bottom and top. They overshoot the leading edge and when sanded will segue sweet and clean into the leading edge supported by the wood bar I installed. I then sanded them flush with the adjacent leading edge and the stab sheet covering. The small gaps I filled with wood filler  (ran out of Hobbylite, and it would need very little). Allowed that to dry overnight, then sanded it flush. Perfectly smooth!

Bottom after cote applied. The orange is a tough match, I had none, and since it's not IMAC, I couldn't care less. It's neat, clean and orderly!

Record the top and leading edge of the stab. Done! Good as new!

Will need to test run the engine and make sure there is no fuel problem that lead to the engine cut out, and then I can take her out to the field in Merrimack and fly her off a decent runway. Psych!

Twinstar Number 2

Lets hope I don't powder this one...

I pulled the trigger on number 2, the Great Planes Twinstar EP. One Hitec HS-82mg never made it home from the crash, one is running a touch more noisy than it should, so ordered two of them. I don't like the red spinners that come with the ARF, and they were damaged so, two of those. Everything else I have, and a $15 discount on the ARF from Tower Hobbies.

Twinstar Number 1.

Southern New Hampshire Flying Eagles RC Club

I made it out to Southern NH Flying Eagles R/C Club in Merrimack, NH today. There was a nice crowd, a lot of club officers were there, and I felt welcomed and far more comfortable than before. It helped, I am sure, that the trees are still bare, so the field felt more open than when the foliage is in full bloom.

I flew my stalwart Alpha 450 through 4 packs, and got comfortable with the tree lines, and lining up with the the Geotec runway. Approaches from the north are easy, but from the south, well, that's gonna take some practce. The trees are right there. A nice steady headwind from the north allowing a very slow approach with a nice floating steep descent nose high would be ideal for getting in there.

The winds aloft were brisk, but there was a moment when it settled down, and I took the recently repaired Pulse XT25e up for a spin, and practiced approaches. She did well here.

I think flying my 10 cc planes here will be fine, but my 30 cc would be tight unless I really pushed her down.

They tell me Tuesdays are the popular days, with beers at The Common Man afterwards. I was the last to leave, and I was glad to be able to close and lock the gate behind me. I think I found my new RC home.

Time to Club Again

I've gotten tired of being at the whim of the quality of the field grass at the Joppa Hill Fields and having landing gear ripped off, and not being able to fly aircraft with smaller wheels. I am tired of repairing those landing gear, which I have spent the afternoon doing.

I have been a member of the Southern NH Flying Eagles for two years, and have flown there once. I didn't really like the feeling of flying in a hole. Most of the flying is done over a forest across from the runway, so the plane is high and distant. And when I was there I didn't get a warm vibe. They weren't rude or distant, it just didn't gel for me. But I only went once...

I Iike to fly, chat, and learn, and I think that is best done in a club environment. I just hope they are a fun bunch.

Wheels on, repairs done. She being my best will be the one I take to the club field.

Rough day at the office: Field Sucks

Two flights, two ripped off landing gear. The field is major clumpy... its a soccer/lacrosse field, and its not rolled. Hopefully it will be, or there will be some twisted ankles.

That dark spot is the pothole, about 4" deep, that my plane rolled into on a beautifully executed touch-and-go rollout.  Pulse XT25e.

I kinda own this one. First flight with the Master Airscrew 13x8x3. Runs sweet and smooth as glass! But in vertical, still runs out of steam, and this time gas: the engine quit in vertical. Did it overload the prop? Engine quiet, downwind landing with looooooong approach, touched down, bounce and ripped off the gear when she came down again. Of course, she ends up in the only smooth area...

Here's what she sounded like though!

Real snow, same issues

Got out today and flew, hoping to get some airborne video off the key cam.

It was kinda gusty.
The key cam failed to turn on.
One of the skiing toed down....