Icarus learned nothing.

Every pilot knows that near the sun lives death. To fly inverted, then outside loop into the corona of the sun is death. And here's the evidence.

I powdered this one...

Ice, Ice, Baby!

I put skis on the Eflite Cub, and today I took her out to try them out! The winds were calm, but with gusts to about 10 mph. There are a couple of inches of snow under a crust of ice, after the freeze-thaws since the light snow fell on Christmas. In the video you can see the Cubbie being blown about, and aloft it was even more so. To have any control I had to fly her on max rates and be patient for changes to come on after control inputs. At times she carried off and then moments later would respond. I only flew one battery, but it was fun!  Between the wind and not wanting the heavier gassers to break through and get clotheslined underfoot by the ice crust, I didn't plan on bringing them out. I did bring the Twinstar, but opted to ground her due to weather.

Cubbie On Ice

It was too windy to fly the little Cubbie, but she did get to sit in her skis.

RCGF 10cc with 13x8x3 Master Airscrew Prop

I decided that instead of a 13x7 or 8, or a 14x7, I would try a three blade prop. This would need to be a 13 inch prop, so I put the Master Airscrew 13x8x3 prop on today, and ran the engine. She gave me a nice idle around 1800-2000 rpm, and would peak at around 8200 rpm, usually maxing at 7800 rpm or so. She produces a nice thrust, as one would expect with a 3 blade prop. Looking forward to trying that full vertical!

Ski Cubbie

I had planned to do this last year but there was so much snow that the parking lot at the field has, no  exaggeration, 5-6 feet of unplowed snow in it, so I flew almost nothing all winter. So far this year not so much.

I put Dubro Park Flier skis on her. The springs don't fit her axle, so I had to McGyver some wire. I also had to make a tail ski from soda bottle plastic. Why one is not included I have no idea. These are thin press formed plastic, maybe even vacu-formed. Not solid at all, but certainly stuff enough to do the job, but if they rip I won't be surprised.

I put some tape over the bottoms to keep snow from filling the space.

Now, if I can just get off this couch...

How BADASS is that?

I decided to go with a 3-blade prop, a Master Air Screw 13x8x3, with  Du-Bro 2-1/2" spinner. I think this will strike the right balance maximizing thrust and speed and can't wait to see if I can get unlimited vertical. Snowed out at the moment, but soon, My Precious,soon!

30cc MXS-R Tail Wheel Up

After having her tail gear roughed up and torn partly off on the crappy clumpy grass, I ordered a replacement carbon fiber laminate one from HK (couldn't find it elsewhere). It arrived yesterday, trimmed it and installed it this evening

Snow and winter weather have arrived, so flying is curtrailed for the near future.