Cat-nab-it!

Damn cat... Good thing she's cute. The other day a cat chewed my wood prop, and last night a nylon one I replaced it with. This morning my wife was brushing her teeth when she heard crunching! Caught Neko, my 3yo Siberian, munching on the left horizontal stab! we suspect she did the props. I did a quick repair this am, not my bet work, but then I suck at cote work...

 

Cat chewed the corner. I have cut out the flattened most chewed part and removed the damaged cote, didn't think to take a pic first. You can see teeth marks...

 

Another look. Still peeling the cote.

 

I didn't have any balsa, as most of my RC stuff is in storage. I McGyvered some cork. Super glued it to the corner.

 

Sanding it down.

 

Smoothed out.

 

Done, re-coted. Not my best work. The same mismatched yellow as on the other side, so now they are balanced.

Kenny and I planned to fly today, but the field is really wet and he's buried in have-to's. I may go this afternoon, but we are certainly flying tomorrow! I expect the Sbach 60" to arrive any day now. The servos came yesterday, so I now have everything I need but the airframe! I hope to have it all together and ready to maiden by this weekend. I hope to have my flying thumbs back in shape by then.

 

Now, to hang the damn plane away from the cats!

 

Posted with Blogsy

Skyline Sbach 60" Electrical System

 

I soldered and made the electrical connections on the Sbach's harness today, and programmed the ESC. One of the reasons I chose the HobbyWing FunFly ESC is that I have HobbyWing programming cards. I hate and never have programmed an ESC via a transmitter. The card is so frickin' easy and they are cheap. I just wish there was more homogeneity in programming so a universal card could be used for all ESCs.This motor is the biggest one I have ever used (as is the battery)!

 

 

This is the entire harness, albeit without the servos. I bound the reciever and tested the motor figuring t which motor wire went to which ESC wire for the proper motor rotation.

Everything took about an hour! Now I just wait for my aircraft kit to arrive, and the servos. Yay!

 

Posted with Blogsy

IRCHA 2014 Registration is Open!

 

Posted with Blogsy

Must. Resist. Spending.

Weather sucks... Has for days. Already gusty outside, ground is soaked from torrential rains. Doesn't look good until Wed... Agita. Must. Fly. Something.

 

 

 

 

 

Posted with Blogsy

Sbach Power Calculations

I did some power calculations using 6S and various prop configurations using eCalc. I estimated the built up weight at 2500gms, and put what I think is my motor in the calculator (went back to do another 8S calculation and that motor choice was gone.... Odd). The simulations seem to make it clear that 6S will be more than powerful enough, giving in excess of a 2:1 thrust to weight ratio. Turns out 8S is likely to over amp the ESC and is waaaaay more power than it needs. It also is clear that I chose a good prop at 17x7 (though a 16x10 would give a nice increase in thrust I think is overkill). Guess I could have gotten a cheaper amp if I had done the calcs first, and not bought a HV ESC...Click the images to enlarge.

Power Setup:

Motor: Turnigy Aerodrive SK 5055-430kv

ESC: HobbyWing FunFly 80A HV

6S, 17x7, 60 amps, 1244 watts, 89.5% eff, 5497 gms thrust

6S, 16x10, 65 amps, 1346 watts, 89% eff, 6377 gms thrust

8S, 17x7, 94 amps, 2545 watts, 86.4% eff, 8819 gms thrust

"DANGER, DANGER, WIL ROBINSON!"

 

So it looks like my planned setup is a good one. Using about 130 watts per pound (aggressive aerobatic sport flying) at roughly 5.5 lbs gives a power requirement of 715 watts. I exceed that by a fair margin, say, about 42% more if I did my math right. Sweet! I will watt test the setup once I get it together, then see how she flies. I can move to a 16x10 if I want some more thrust and still stay within the power limits of the setup!

 

Posted with Blogsy

Skyline/Goldwing Sbach 342 60"

 

Oh, I have been a very naughty boy...

Today I pulled the trigger on this gorgeous Skyline-Goldwing Sbach 342 60" (1520mm) from General Hobby. It was on sale, I had to! I am putting a Turnigy Aerodrive SK3 5055-430kv motor behind a HobbyWing FunFly 80A HV ESC, with Hitec HS-5485HB servos all around. I am planning on flying her 6-8S. I have a Spektrum AR610 DSMX reciever. I am planning to use an APC 17x7e prop. I suspect she will have plenty of power 6S but she can handle 8S.

She will be the highest powered plank I own. Build series to follow!

 

Posted with Blogsy

No Fly Zone

Well, it was a beautiful day, but super gusty with modrate sustained winds, so grounded. Kenny and I did meet up at MCRCC and spent a couple of hours chatting, and enjoying a cigar. It looks like stong winds are the story for the next few days... judgement rules, survive to fly another day.

 

 

 

Posted with Blogsy