Friday, December 15, 2017

My VMU-2 Marine Drone

I decided to paint up a cowl for my HK 500 heli as a Marine VMU-2 Drone. It came out pretty amazing!

I sanded down and repaired an old cowl, and covered it in light gray primer. I printed a set of Marine graphics on waterslide decal, and applied them, then covered the entire thing in clear matte.

VMU-2 is a real United States Marine Unmanned Aircraft Squadron.  The centerline graphic is their logo.






Looking forward to flying her!

Saturday, December 2, 2017

New Swash, Tail event

I had noticed that the swash plate on the 500 was loose at the center, so ordered a replacement. I installed it today. It looks and works tight and snug.

I spun the bladeless heli up and there was a vibration, wasn't sure where from and then all hell broke loose. It was the tail. Something went wrong and the end result was that the tail feathering shaft was bent 45 degrees, distorting the stanchion that holds the feathering mechanism that attaches to the tail control rod. It broke the rod, stripped the tail belt power take-off gear at the main gear. I had to replace the tail feathering shaft. I bent the stanchion back and replaced the feathering device (the thing that takes the movement from the control rod to the tail shaft). I had to order a new power take-off gear from Amainhobbies.com. I didn't take pics, sorry, but it was impressive. No damage to the tail boom, but I will replace the tail blades.



New swash in place.



New left, old right.



Closer view.